【視聴数 204883】
【チャンネル名 GamerTechToronto】
【タグ 動画,ビデオ,共有,カメラ付き携帯電話,動画機能付き携帯電話,無料,アップロード,チャンネル,コミュニティ,YouTube,ユーチューブ】
ガジェット-youtube動画リンクまとめ ガジェット関係のyoutube動画のリンクをまとめました!ガジェット系のチャンネル探しに便利です!最新の役立つガジェット情報があります!
【視聴数 204883】
【チャンネル名 GamerTechToronto】
【タグ 動画,ビデオ,共有,カメラ付き携帯電話,動画機能付き携帯電話,無料,アップロード,チャンネル,コミュニティ,YouTube,ユーチューブ】
「これするだけでおこずかい7000円ゲット!?」中学生でもスマホがあればできる期間限定キャンペーンを利用して7000円分ポイントをゲットする方法がこちらw
【また爆益キター!!】TikTokキャンペーンを利用して簡単に3200円貰う方法がこちらw【期間限定】
I’ve seen bad parts take out other parts
Dude needs a massive upgrade on his PC
I think I have the same issue with my motherboard or gpu but nini tried his best to help me in discord ♡
power surge
proud of you for finally resetting cmos
Probably bad motherboard shorted the ram on its way out
Jesus loves you .,;.,
I wonder if the motherboards ram power traces shorted killing the ram and the board
Typical gigabyte/aorus garbage
So randomly I see my cooler in another pc. That’s rare for me to see.
The m.2 ssd was bad. This just happened to my 2 year old m.2 2 days ago. You can boot into the bios by plugging the DP cable into another port and starting the computer and obviously spam “delete”. The m.2 ssd won’t be detected and if switching m.2 slots don’t work than ssd is bad.
My m.2 ssd went bad right after shutting down my computer to build my am5 board. Idk why but my guess it static.🤷🏾
CPU socket
reseat cpu/ check pins
I had a faulty mother board with a broken ram slot and two ram sticks with one dead ram and a dud. felt bad man
As soon as I saw the graphics it needed to be reseated
I had a similar issue recently. Got new ram or was messing with something don’t remember and was frustrated because i had no display so i couldn’t even go to bios and removing the new ram didn’t work either.
After some trying and asking around i just spammed random F buttons out of frustration (F1, F2, etc) and that actually fixed it. So if you still have contact to him tell him to boot up the PC and just press random.F.keys, enter, backspace, escape and stuff like that. It worked for me. I think the combination was something like F2 , enter and escape but not completely sure what fixed it.
Also o think I also had an ez debug lamp glowing during bootup but don’t remember which one and that also turned off once i spammed my keyboard
That was not very thorough testing 🧐. May Not be bricked you need a bios flashback tool flash it to stock then update it to newest set ram to lowest frequency and use a super low end card with no extra power connectors on it my preference is a hd4850 and or a Quadro 4000 both work with almost all hardware. I always test my supplies very first and make sure every connector is running at the right voltage and staying steady under a boot load. Resetting cmos was good but a lot was missed in a step by step of proper testing. It’s possible your right not saying your not but ensuring that all tests are properly done does matter imo. Also 1 stick of 2133 ddr4 ram on the leftmost channel along with a cpu change would be another config to try. Sometimes its a pin is brushed wrong it’ll not seat perfect giving weird errors I have seen this and sometimes a cleaning and getting in the socket with a tiny screwdriver to fix any of that may help. A bright light will allow you to see any oddities in the socket. Light will reflect funny on a pin that’s even partly out of place some pins don’t matter (redundant or dummy pins) whereas some will cause issues if a spec of dirt is interfering with it. Maybe he over tightened the cooler and bent the board to where traces broke with a bright light again around the socket if there is evidence of that it may be visually seeable. Look for burnt transistors or poor solder joints sometimes a repair is as easy as reflowing some solder. There’s all kinds of basic things to look for before ruling out total failure of ram and board. That’s my 2 cents.
My freind got 3 broken products 😨
no debugging light? mobo was cheap then
i just upgraded to an m.2 and another 16gb of ram and now my pc bluescreens twice to 3 times a day, anything you know that could be the cause? specs: MSI MAG b550 gaming plus mobo, 32 gb of same MHz ram, 1tb hdd, 250gb ssd, 1tb samsung m.2, RTX 3060
r7 5800x, ml240lv2 rgb AIO, ive looked at the temps of both cpu and gpu and they’re below the limit under load